| Motor: |
- A21 Outrunner
- 1300Kv
- Shaft Size 2.3mm threaded with 2x locking nuts and 2x washers
- Weight 37g
- Prop Size 8x4 / 8x3.8 (Props not included)
- Li-Po 2 - 3 cell (7.4v - 11.1V - battery not included)
|
| Electronic Speed Controller: |
- 18A Brushless ESC
- Dimensions 50x25x7mm
- Weight 21g
- Fully Programmable through TX or programming card ($15 programming cards not included)
- 2 - 3 Cell Li-xx / 6 -10 NI-xx
- BEC 5V 3A
- Programming Instructions Included.
|
| Servos: |
- 9g Micro Servos with Nylon Gears
- Dimensions 23x12x25.5mm
- Operating Speed (4.8V no load): 0.12sec/60 degrees
- Torque (4.8V): 1.6 kg/cm
- Temperature Range: -30 to +60 Degree C
|